MODEL JN8504 8.5-AMP BISCUIT JOINER Instruction Manual NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: 1-800-232-1195 (M-F 8AM-5PM CST) TECHSUPPORT@WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance.
CONTENTS WELCOME 3 Introduction...................................................................................................... 3 Specifications.................................................................................................... 3 SAFETY 4 General Safety Rules......................................................................................... 4 Biscuit Joiner Safety Warnings......................................................................... 6 Electrical Information.....
INTRODUCTION Thanks for purchasing the WEN Biscuit Joiner. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety concerns, as well as helpful assembly and operating instructions for your tool. Indicates danger, warning, or caution.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. WORK AREA SAFETY 1. Keep work area clean and well lit.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. 7.
BISCUIT JOINER SAFETY WARNINGS WARNING! Do not let comfort or familiarity with the product replace strict adherence to product safety rules. Failure to follow the safety instructions may result in serious personal injury. BISCUIT JOINER SAFETY 1. TOOL PURPOSE This biscuit joiner is designed to create appropriately sized slots in wood to allow easy joining with biscuits.
BISCUIT JOINER SAFETY WARNINGS WARNING! Do not let comfort or familiarity with the product replace strict adherence to product safety rules. Failure to follow the safety instructions may result in serious personal injury. 14. REPLACEMENTS. Should any component of your joiner be missing/ damaged or fail in any way, shut off the switch and remove the plug from power supply outlet. Replace the missing, damaged, or failed parts using only identical replacement parts before resuming operation.
ELECTRICAL INFORMATION GROUNDING INSTRUCTIONS In the event of a malfunction or breakdown, grounding provides the path of least resistance for an electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching outlet that is properly installed and grounded in accordance with ALL local codes and ordinances. 1. Do not modify the plug provided.
UNPACKING & PACKING LIST UNPACKING With the help of a friend or trustworthy foe, such as one of your in-laws, carefully remove the biscuit joiner from the packaging and place it on a sturdy, flat surface. Make sure to take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list below to make sure you have all of the parts and accessories.
KNOW YOUR BISCUIT JOINER TOOL PURPOSE This biscuit joiner is designed to create appropriately sized slots in wood to allow easy joining with biscuits. Refer to the following diagrams to become familiarized with all the parts and controls of your biscuit joiner. The components will be referred to later in the manual for assembly and operation instructions.
ASSEMBLY & ADJUSTMENTS SETTING THE CUTTING DEPTH Fig. 2 The depth adjustment dial helps to control the depth of cut for different size biscuits. The dial has depths that correlate to biscuit sizes #0, #10, and #20 (see pages 13 and 14 for detailed biscuit information) along with a setting “M” that correlates to the deepest cut the biscuit joiner can cut. 1 It is recommended to calibrate the depth of cut initially and every few months, depending on frequency of use.
ASSEMBLY & ADJUSTMENTS SETTING THE HEIGHT OF CUT Fig. 6 The height fence allows the biscuit slot to be cut at different heights. The height of the cut is set by adjusting the angle fence and the height fence. 1. Loosen the angle lock knob (Fig. 6 - 1) and rotate the angle fence (Fig. 6 - 2) to 90° or the desired cutting angle. 2. Loosen the height locking knob (Fig. 7 - 1) to raise or lower the fence assembly (Fig. 7 - 2) to the desired height. 3. Tighten the height lock knob.
OPERATION MAKING A BISCUIT SLOT Fig. 10 1. Ensure the workpiece is secure and clamped down. 2. Adjust cutting depth, fence angle, and height of cut (see pages 11 and 12). 3. Plug the biscuit Joiner into a proper outlet. 4. Align the cutting guides on the fence and slide plate with the marks on the workpiece (Fig. 10). NOTE: It is recommended to mark the center of the desired biscuit slot on a face that will be visible during the cutting operation.
OPERATION OPERATION TIPS CONT. There are many different types of joints that can be made using biscuits. See Figure 12 for a few common different types of layouts. Fig. 12 Corner Joint Edge Miter Joint 45° Frame Joint T Joint Edge to Edge Joint Offset Joint When determining the location of the biscuit slots, it is generally recommended to place a biscuit in the middle of the joint and additional biscuits 6 to 10 inches from the center biscuit on each side.
MAINTENANCE WARNING! To prevent serious injury from accidental operation, make sure that the biscuit joiner is turned off and unplugged from power source before installation, cleaning, and maintenance operations. WARNING! Preventive maintenance performed by unauthorized personnel may result in misplacing of internal wires and components, possibly causing a serious hazard. CLEANING • • • • • Keep the biscuit joiner clean of any wood chips, dust, dirt or debris.
TROUBLESHOOTING GUIDE WARNING! Stop using the tool immediately if any of the following problems occur. Repairs and replacements should only be performed by an authorized technician. For any questions, please contact our customer service at 1-(800) 232-1195, M-F 8-5 CST or email us at techsupport@wenproducts.com. PROBLEM Unit will not start. CAUSE 1) Power cord is not connected to a power supply. 2) Power outlet does not have power. 3) Internal damage or excessive wear (ex.
EXPLODED VIEW & PARTS LIST 17
EXPLODED VIEW & PARTS LIST No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 18 Part No.
WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship during personal use for a period of two (2) years used for professional or commercial use.
THANKS FOR REMEMBERING V. 2020.03.
