Use and Care Manual

MOUNTING FOR STATIONARY WORK

Your belt sander can be mounted on a stable worktop to function as a stationary sander.

OPERATION

TO MOUNT

Mounting on one side

1. Make sure sander is unplugged. Prepare a stable worktop.

2. Turn sander over as shown in Figure 6 and place it onto the stable worktop.

3. Locate the mounting clamp opening on the tensioning lever side. Insert one mounting clamp into the

mounting clamp opening (Fig. 6) and tighten it.

4. Place the second mounting clamp on top of the front handle (Fig. 6) and tighten it. Make sure both

mounting clamps are tightened.

5. Use as a stationary sander.

Mounting Clamps

Mounting

Clamps

2” x 4”

Mounting

Clamp Hole

Fig. 6

Front

Handle

Fig. 7

With Two Mounting Clamps

1. Make sure sander is unplugged. Prepare a 2” x 4” piece of wood to which the sander can be securely

mounted.

2. Turn sander over as shown in Figure 7 and place on 2” x 4” piece of wood.

3. Locate the mounting clamp openings on both sides of the sander, near the handle. Insert one

mounting clamp into the mounting clamp opening (Fig. 7) and tighten it onto the wood. Repeat on the

opposite side. Make sure both mounting clamps are tightened.

4. Use as a stationary sander.