MODEL CM1452 14-INCH CHOP SAW Instruction Manual NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: 1-800-232-1195 (M-F 8AM-5PM CST) TECHSUPPORT@WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance.
CONTENTS WELCOME 3 Introduction...................................................................................................... 3 Specifications.................................................................................................... 3 SAFETY 4 General Safety Rules......................................................................................... 4 Chop Saw Safety Warnings............................................................................... 6 Electrical Information.....
INTRODUCTION Thanks for purchasing the WEN Chop Saw. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety concerns, as well as helpful assembly and operating instructions for your tool. Indicates danger, warning, or caution.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. WORK AREA SAFETY 1. Keep work area clean and well lit.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. 7.
CHOP SAW SAFETY WARNINGS WARNING! Do not let comfort or familiarity with the product replace strict adherence to product safety rules. Failure to follow the safety instructions may result in serious personal injury. SAW BLADE SAFETY 1. Always wear protective gloves when handling saw blades. 2. Only use blades with correct size and type for both your saw and your workpiece. • The rated diameter of the saw blade is 12” with a 1” arbor. • The no-load speed of the miter saw is 3800 RPM.
CHOP SAW SAFETY WARNINGS WARNING! Do not let comfort or familiarity with the product replace strict adherence to product safety rules. Failure to follow the safety instructions may result in serious personal injury. 3. Examine the saw for any damaged or missing parts. Replace or repair damaged parts before operation. Periodically check that all nuts, bolts and other fasteners are properly tightened. SECURE YOUR WORKPIECE 1. Always position the workpiece on the table and firmly against the fence.
ELECTRICAL INFORMATION GROUNDING INSTRUCTIONS In the event of a malfunction or breakdown, grounding provides the path of least resistance for an electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching outlet that is properly installed and grounded in accordance with ALL local codes and ordinances. 1. Do not modify the plug provided.
UNPACKING & PACKING LIST UNPACKING With the help of a friend or trustworthy foe, such as one of your in-laws, carefully remove the chop saw from the packaging and place it on a sturdy, flat surface. Make sure to take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list below to make sure you have all of the parts and accessories.
KNOW YOUR CHOP SAW TOOL PURPOSE Chop saws allow you to easily cut through metals and other various materials quick and easily. Refer to the following diagrams to become familiarized with all the parts and controls of your chop saw. The components will be referred to later in the manual for assembly and operation instructions.
ASSEMBLY & ADJUSTMENTS WARNING! Do not plug in or turn on the tool until it is fully assembled according to the instructions. Read through and become familiarized with the following procedures of handling and adjusting your chop saw. Failure to follow the safety instructions may result in serious personal injury. GUARD OPERATION NOTE: Keep hands clear of the blade when the operating handle (Fig. 2 - 1) is lowered. Do not interfere with the proper movement of the blade guard (Fig. 2 - 2). Fig.
ASSEMBLY & ADJUSTMENTS WARNING! Do not plug in or turn on the tool until it is fully assembled according to the instructions. Read through and become familiarized with the following procedures of handling and adjusting your chop saw. Failure to follow the safety instructions may result in serious personal injury. ADJUSTING THE CUTTING ANGLE Fig. 5 The rear vise fence can be adjusted to allow for cutting larger work pieces or cutting at varied angles (between 0° and 45°).
ASSEMBLY & ADJUSTMENTS WARNING! Do not plug in or turn on the tool until it is fully assembled according to the instructions. Read through and become familiarized with the following procedures of handling and adjusting your chop saw. Failure to follow the safety instructions may result in serious personal injury. V-VISE ATTACHMENT 2 Your chop saw comes with a V-vise attachment (Fig. 6 - 1) to help cut a wide range of materials safely.
ASSEMBLY & ADJUSTMENTS CHANGING THE SAW BLADE DANGER! Never try to use a blade larger or thicker than the stated capacity of the saw. Check to make sure that your place is suitable for the intended cutting operation. To remove the blade: 1. Unplug the tool from its power source. 2. Make sure that the saw blade is in its upper position. Fig. 9 1 3. Loosen the blade cover screw (Fig. 9 - 1) that secures the arbor cover plate and rotate the cover plate up and over to reveal the arbor bolt and outer flange.
OPERATION WARNING! Do not plug in or turn on the tool until it is fully assembled according to the instructions. Read through and become familiarized with the following procedures of handling and adjusting your miter saw. Failure to follow the safety instructions may result in serious personal injury. 1. RAISE THE SAW ARM Before operation, raise the saw arm from the lower position. See section titled, “Guard Operation” on page 11. 2.
OPERATION WARNING! Before operating the miter saw, make sure to equip yourself with a dust mask, ear protection, and safety glasses for protection from possible injuries. Tie back long hair and do not wear loose clothing or jewelry. Do not wear gloves while operating the saw.
MAINTENANCE WARNING! To avoid accidents, turn OFF and unplug the tool from the electrical outlet before cleaning, adjusting, or performing any maintenance work. WARNING! Any attempt to repair or replace electrical parts on this tool may be hazardous. Servicing of the tool must be performed by a qualified technician. When servicing, use only identical WEN replacement parts. Use of other parts may be hazardous or induce product failure.
TROUBLESHOOTING GUIDE WARNING! Stop using the tool immediately if any of the following problems occur. Repairs and replacements should only be performed by an authorized technician. For any questions, please contact our customer service at 1-(800) 232-1195, M-F 8-5 CST or email us at techsupport@wenproducts.com. PROBLEM CAUSE Blade is dull. Blade is dirty. Ineffective cutting performance. The blade is not secure. Incorrect blade used for workpiece. Excessive noise or vibration. Blade will not turn.
TROUBLESHOOTING GUIDE WARNING! Stop using the tool immediately if any of the following problems occur. Repairs and replacements should only be performed by an authorized technician. For any questions, please contact our customer service at 1-(800) 232-1195, M-F 8-5 CST or email us at techsupport@wenproducts.com. PROBLEM CAUSE Tool forced to work too fast. Saw overheats. The extension cord is too long or too thin. Blocked motor housing vents.
EXPLODED VIEW & PARTS LIST 20 NOTE: Not all parts may be available for purchase.
EXPLODED VIEW & PARTS LIST No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 Part No. Description CM1452-001 Screw M5x12 CM1452-002 Motor Cap CM1452-003 Bearing Support Plate CM1452-004 Wave Washer CM1452-005 Screw M5x10 CM1452-006 Red Gasket CM1452-007 Motor Label CM1452-008 Bolt M5x15 CM1452-009 Depth Stop CM1452-010 Motor Housing CM1452-011 Warning Label CM1452-012 Washer 5 mm CM1452-013 Screw M5x10 CM1452-014 Left Handle CM1452-015 Screw ST4.
EXPLODED VIEW & PARTS LIST 22 No. 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Part No.
WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship during personal use for a period of two (2) years used for professional or commercial use.
THANKS FOR REMEMBERING V. 2020.11.
