Use and Care Manual

9
ASSEMBLY AND ADJUSTMENTS
INSTALLING THE DUST CHUTE
Slide the dust chute (Fig. D - 1) onto the end of the chip exhaust (Fig. D - 2). Tighten the pan head screw.
INSTALLING THE DUST COLLECTION BAG
The half bag dust collection set is designed to provide dust collection for woodworking tools using the 2.25-inch
diameter dust exhaust port. The filter bag operates as an easy, convenient saw dust collection and disposal system.
To install:
1. Place the spring (Fig. E - 1) inside of the filter bag arm (Fig. E - 2).
2. Slide the arm with the spring over the dust exhaust port (Fig. E - 6).
Fig. D
1
2
1
2
Fig. E