Use and Care Manual

NOTE: With each full rotation on the depth-adjustment handle,

the planer’s height adjusts 1/16”. For example, 1/4 of a rotation is

1/64”, 1/2 of a rotation is 1/32”, and 1 full rotation is 1/16”.

ASSEMBLY AND ADJUSTMENTS

PREPARING THE TABLES (Fig. 3 - 5)

Lower the infeed and outfeed tables.

ATTACHING THE CRANK HANDLE (Fig. 2)

It’s time to put this thing together! First, place the washer (Fig. 2 -

3) over the socket head bolt (Fig. 2 - 2) and feed the bolt into the

handle (Fig. 2 - 4). Tighten the bolt to secure the handle in posi-

tion on top of the planer. Place the handle cap (Fig. 2 - 1) onto the

handle as shown in Fig. 2.

Fig. 3

Fig. 4

Remove the foam insert located between the main table and the blade drum (Fig. 5).

Fig. 5

Fig. 2