2.5-INCH THICKNESS PLANER Instruction Manual NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: 1-800-232-1195 (M-F 8AM-5PM CST) TECHSUPPORT@WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance.
CONTENTS WELCOME 3 Introduction...................................................................................................... 3 Specifications.................................................................................................... 3 SAFETY 4 General Safety Rules......................................................................................... 4 Planer Safety Warnings..................................................................................... 6 Electrical Information.
INTRODUCTION Thanks for purchasing the WEN Thickness Planer. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety concerns, as well as helpful assembly and operating instructions for your tool. Indicates danger, warning, or caution.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. WORK AREA SAFETY 1. Keep work area clean and well lit.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. 7.
PLANER SAFETY WARNINGS WARNING! Do not let comfort or familiarity with the product replace strict adherence to product safety rules. Failure to follow the safety instructions may result in serious personal injury. PLANER SAFETY 1. Whenever adjusting or replacing any parts on planer, turn switch OFF and remove plug from power source. 2. Make sure all guards are properly attached and securely fastened. 3. Make sure all moving parts are free from interference. 4. Always wear eye protection or face shield. 5.
ELECTRICAL INFORMATION GROUNDING INSTRUCTIONS In the event of a malfunction or breakdown, grounding provides the path of least resistance for an electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching outlet that is properly installed and grounded in accordance with ALL local codes and ordinances. 1. Do not modify the plug provided.
UNPACKING & PACKING LIST UNPACKING With the help of a friend or trustworthy foe, such as one of your in-laws, carefully remove the planer from the packaging and place it on a sturdy, flat surface. Make sure to take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list below to make sure you have all of the parts and accessories.
KNOW YOUR PLANER TOOL PURPOSE Resurface boards, flatten workpieces, and much more with your WEN Thickness Planer. Refer to the diagram below to become familiarized with the parts and controls of your thickness planer.
ASSEMBLY & ADJUSTMENTS ATTACHING THE DEPTH ADJUSTMENT HANDLE 1. Secure the depth adjustment handle (Fig. 2 - 1) to the top of the planer using the included socket head bolt (Fig. 2 - 2) and washer (Fig. 2 - 3). 4 3. Place the handle cap (Fig. 2 - 4) on top of the depth adjustment handle, covering the socket head bolt and washer. Fig. 2 2 3 NOTE: With each full rotation of the depth-adjustment handle, the planer’s height adjusts 1/16”.
OPERATION WARNING! Do not connect planer to the power source until all assembly steps have been completed. ON / OFF SWITCH Fig. 6 The ON / OFF switch (Fig. 6 - 1) is located on the front of the planer motor. To turn the planer ON, flip the switch to the up position. To turn the planer OFF, flip the switch to the down position. SWITCH LOCK Remove the yellow tab to engage child-safety lock and prevent unwanted start-ups.
OPERATION HEIGHT OF CUT Fig. 7 Rotate crank handle (Fig. 7 - 1) to adjust height of cutterhead. The depth scale (Fig. 7 - 2) shows height of the cutterhead above the main table. The quality of the planed wood depends on the operator’s experience and judgment about the depth of cut. The depth of cut depends on the width, species, hardness, moisture content, grain direction, and grain structure of the wood. The maximum thickness is 3/32” for planing operations.
OPERATION PREPARE WORK Thickness planers work best when at least one side of the lumber is flat. Use a surface planer or a jointer to create a flat surface. Twisted or severely warped boards can jam the planer and should not be used. Rip lumber in half to reduce magnitude of warp. Work should be fed into the planer in same direction as the grain of the wood. Sometimes the grain will change direction in the middle of the board.
OPERATION THE DO’S AND DONT’S OF GRAIN DIRECTION Fig. 8 WARNING! Never plane against grain direction of the wood. Do not plane end grain, as the wood could splinter or possibly explode. on of G re cti Di When planing the face and side/edge grain, always plane in the direction of the grain. Do not plane perpendicular to the grain, otherwise the board also has a chance of splintering and exploding. ra in Always plane with the grain of the wood (in the same direction as the grain).
MAINTENANCE CHANGING BLADES WARNING! Always turn the planer OFF and disconnect it from the power source before starting any maintenance work. Fig. 9 1 For video instructions, visit: http://bit.ly/planerblades Blades should always be reversed or replaced as a matched set (at the same time). 2 1. Remove the dust chute (Fig. 9 - 1) by unscrewing the thumb screws (Fig. 9 - 2). Fig. 10 2. Loosen and remove the two hex screws (Fig. 10 - 1) from the blade guard on the rear side of the cutterhead.
MAINTENANCE WARNING! Turn planer off and disconnect from power source before performing any maintenance. BRUSH INSPECTION AND REPLACEMENT Fig. 13 Brush life depends on the load of the motor. Regularly inspect brushes after 100 hours of use. Brushes are located on either side of the planer motor, on both the front and rear side of the planer. Loosen brush cap (Fig. 13 - 1) and carefully remove brush from motor. Replace brushes if the spring is damaged.
TROUBLESHOOTING GUIDE ADJUSTING INFEED / OUTFEED EXTENSION TABLE We recommend setting your infeed and outfeed tables so that the ends of the table extensions are approximately 1mm above the top of the granite table. 1. Locate the table elevation adjustment screw and nut on both sides of the planer, next to the hinge (Fig. 14). 2. Raise the extension table to expose the screws (Fig. 15). 3.
EXPLODED VIEW & PARTS LIST 1 1A 5 2 3 4 7 6 8 38 37 9 10 11 39 14 15 12 8 16 18 13 10 19 17 24 23 22 23 25 20 21 26 36 27 35 31 28 29 34 30 32 10 18 33
EXPLODED VIEW & PARTS LIST No. Part No. Description Qty. No. Part No. Description Qty.
EXPLODED VIEW & PARTS LIST 20
EXPLODED VIEW & PARTS LIST No. Part No. Description Qty. No. Part No. Description Qty.
WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship during personal use for a period of two (2) years used for professional or commercial use.
NOTES 23
THANKS FOR REMEMBERING V. 2020.02.
