Use and Care Manual

TABLE OF CONTENTS
Specifications .................................................................................. 2
Introduction .................................................................................... 3
General Safety Rules ....................................................................... 4
Specific Safety Rules for the Spindle Sander ................................... 6
Electrical Information ...................................................................... 8
Know Your Spindle Sander .............................................................. 9
Assembly & Adjustments .............................................................. 10
Operation ...................................................................................... 13
Maintenance .................................................................................. 14
Troubleshooting Guide .................................................................. 15
Exploded View & Parts List ........................................................... 17
Warranty Statement ....................................................................... 20
SPECIFICATIONS
The following replacement sanding sleeves can be purchased from wenproducts.com by searching their
respective model numbers: WEN 80-Grit Sanding Sleeves (model 6510SP80), WEN 120-Grit Sanding
Sleeves (model 6510SP120), WEN 150-Grit Sanding Sleeves (model 6510SP150), WEN 240-Grit Sanding
Sleeves (model 6510SP240), and the WEN Assorted Sanding Sleeve Combo Pack (model 6510SPC).
2
Model Numbers 6510, 6510T
Power 120V, 60Hz, 3.5A
Motor Speed 2000 RPM (no load)
Oscillations 58 OPM with 5/8" of travel
Spindle Size 1/2"
Sanding Sleeve Sizes 1/2", 3/4", 1", 1-1/2", 2", 3" (80 Grit)
Maximum Workpiece Height 3-5/8"
Weight 35 lbs.