/2 X 18 INCH BELT SANDER Model # 6307 bit.ly/wenvideo 3104259 IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe, reliable service.
TABLE OF CONTENTS Technical Data General Safety Rules Specific Safety Rules For the Sander Electrical Information Know Your Belt Sander Assembly and Adjustments Operation Maintenance Exploded View and Parts List Warranty 2 3 4 6 7 8 9 9 10 12 TECHNICAL DATA Model Number: Motor: Speed: Belt Size: Range of Motion: Weight: Product Dimensions: Included Sanding Belts: 2 6307 120 V, 60 Hz, 2A 1100 to 1800 feet per minute 1/2 x 18 in. 55° 2.4 lbs 17.5 x 3.5 x 3.5 in.
GENERAL SAFETY RULES Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and serious injury. To avoid mistakes and serious injury, do not plug in your tool until the following steps have been read and understood. WORK AREA SAFETY 1. Keep work area clean and well lit.
GENERAL SAFETY RULES 2. Check power tool for damaged parts. Check for misalignment of moving parts, jamming, breakage, improper mounting, or any other conditions that may affect the tool’s operation. Do not use the power tool if the switch does not turn ON/OFF. Any part that is damaged should be properly repaired or replaced before use. 3. Do not force the tool to do a job for which it was not designed.
SPECIFIC RULES FOR THE SANDER 3. Securing the Workpiece Never hold the workpiece in your hand or across your legs. Small workpieces must be adequately secured so that the rotating belt doesn’t pick them up during the forward motion of the sander. Unstable support causes the belt to bind, resulting in a loss of control and possible injury. 4.
ELECTRICAL INFORMATION GROUNDING INSTRUCTIONS IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least resistance for an electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching outlet that is properly installed and grounded in accordance with ALL local codes and ordinances. DO NOT MODIFY THE PLUG PROVIDED.
KNOW YOUR BELT SANDER 5 4 6 7 8 3 2 1 10 9 1. Power Switch 2. Speed Control 3. Handle 4. Angle Locking Screw 5. Belt Tensioning Button 6. Arm 7. Sanding Belt 8. Front Roller 9. Belt Direction Indicator 10. Dust Extraction Port ASSEMBLY CHOOSING SANDING BELTS This item includes three sanding belts, one 80-grit sanding belt (fitted on the tool), one 120-grit sanding belt and one 320-grit sanding belt. Sanding belts come in different grades from rough through to smooth.
ASSEMBLY AND ADJUSTMENTS WARNING: To avoid injury from accidental startups, switch off the tool and unplug the power cord before adjusting, replacing accessories, cleaning or maintenance. INSTALLING THE SANDING BELT 1. Press the tip of the sander against a hard object to retract the front roller (Fig. 1). 2. Insert the sanding belt on the rollers. Check that the arrow on the inside of the sanding belt points in the same direction as the arrow indicated on the tool (Fig. 2 - 1). Fig. 1 3.
OPERATION The tool is intended for sanding flat exterior and interior surfaces, rounding corners and edges, deburring, removing paint, welding spatter and rust, and for sharpening knives and scissors etc. All other applications are considered to be unsuitable. Do not use the tool for anything other than its intended purposes. CAUTION: Never cover air vents since they must always be open for proper motor cooling.
EXPLODED VIEW AND PARTS LIST 10
EXPLODED VIEW AND PARTS LIST No Part Number Description Qty.
LIMITED TWO YEAR WARRANTY WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
