3.6V LITHIUM-ION CORDLESS SCREWDRIVER Model # 49103 bit.ly/wenvideo 3148819 IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe, reliable service.
TABLE OF CONTENTS Technical Data Introduction General Safety Rules Specific Rules for Screwdrivers Safety Rules for Batteries & Chargers Electrical Information Know Your Screwdriver Charging Your Screwdriver Operation Maintenance Disposal Exploded View and Parts List Warranty 2 3 4 6 6 8 9 9 10 11 11 12 14 TECHNICAL DATA Model Number: Charger Input Voltage: Charger Output Voltage: Battery: Rated Speed: Rated Torque: Chuck Capacity: Weight: Included Screwdriver Bits: 2 49103 120V AC, 60 Hz, 0.
INTRODUCTION Thanks for purchasing the WEN Cordless Screwdriver. You now have the perfect companion for inserting and removing screws. However, before screw driving anything, please take a moment to read through this manual. It contains important information regarding safety, assembly and operation of this product. Please keep this manual available to all users during the entire life of the screwdriver.
GENERAL SAFETY RULES Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and serious injury. To avoid mistakes and serious injury, do not plug in your tool until the following steps have been read and understood. WORK AREA SAFETY 1. Keep work area clean and well lit.
GENERAL SAFETY RULES POWER TOOL OPERATION 1. Avoid accidental start-ups. Make sure the power switch is in the OFF position before connecting the plug to a power source or carrying the tool. 2. Check power tool for damaged parts. Check for misalignment of moving parts, jamming, breakage, improper mounting, or any other conditions that may affect the tool’s operation. Any part that is damaged should be properly repaired or replaced before use. 3.
SPECIFIC RULES FOR SCREWDRIVERS 1. Hold the screwdriver only by the insulated gripping surfaces during operation. Fasteners that contact hidden wiring may make the exposed metal parts of the power tool “live” and could electrically shock the operator. 2. Store the screwdriver and charger indoors in dry condition. Do not expose the screwdriver or the charger to temperatures over 104°F (40°C). 3. Be sure you always have a firm footing and hold the tool firmly.
SAFETY RULES FOR BATTERIES AND CHARGERS 7. Do not charge the tool inside a box or container of any kind. The tool must be placed in a well-ventilated area during charging. Do not allow anything to cover or clog the charging vents. 8. Do not operate the charger or the tool if it has received a sharp blow, either from being dropped or damaged. Take it to a qualified service technician before attempting to use. 9.
ELECTRICAL INFORMATION GROUNDING INSTRUCTIONS FOR PRODUCTS WITH GROUNDING PLUGS WARNING: This tool must be grounded while in use to protect the operator from electric shock. 1. In the event of a malfunction or breakdown, grounding provides the path of least resistance for an electric current and reduces the risk of electric shock. This charger is equipped with an electric cord that has an equipment grounding conductor and a grounding plug.
KNOW YOUR SCREWDRIVER Make sure all the following parts are accounted for before discarding the packaging. If any part is missing or broken, contact our customer service at 1-800-232-1195. Battery and Charger Indication Lights Quick Release Chuck INCLUDED ACCESSORIES : • Charger (1) • Belt Holster (1) • Screwdriver Bits (3) LED Work Light ON/OFF switch Direction and Safety Switch CHARGING YOUR SCREWDRIVER ATTENTION: The battery must be charged fully before the first time use. 2 1.
OPERATION WARNING: To avoid personal injury and damage to the tool, do not attempt to operate the tool until the following operation instructions have been fully read and understood. LOCKING THE POWER SWITCH Before installing bits or making any adjustments, make sure to lock the power switch in the OFF position to prevent accidental starting. 1. To lock the power switch, place the direction and safety switch (Fig. 2 - 1) in the center position. 2. Check that the power switch can not be pressed down. 1 Fig.
OPERATION LED WORKING LIGHT The LED work lights (Fig. 7 - 1) are located on the front of the screwdriver, allowing workpieces to stay illuminated when the screwdriver is running. Fig. 7 1 MAINTENANCE This tool is permanently lubricated at the factory and requires no additional lubrication. There are no user serviceable parts in your power tool. Do not try to open or disassemble your screwdriver or replace the battery cell.
EXPLODED VIEW & PARTS LIST 12
EXPLODED VIEW & PARTS LIST No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 Part No.
LIMITED TWO YEAR WARRANTY WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
