Use and Care Manual
9
KNOW YOUR BLOWER
1
2
3
4
5
6
AMPERAGE
REQUIRED GAUGE FOR EXTENSION CORDS
25 ft. 50 ft. 100 ft. 150 ft.
2.5 A 18 gauge 16 gauge 14 gauge 12 gauge
ASSEMBLY
ATTACH /REMOVE THE BATTERY
Note: The battery is not fully charged at the time of purchase. Before using the blower for the first time, place the
battery in the charger and charge it fully.
To insert the battery, slide it into the back of the blower until a “click” is heard. Make sure the battery is fully
inserted and latched into position.
To remove the battery, press the two release buttons on either side of the battery and slide the battery out of the
blower. This is the same way to insert and remove the battery from the charging station.
7
1 Carrying handle
2 Trigger Switch
3 Speed Control
4 Turbo Switch
5 Blower Tube
6 High Pressure Nozzle Tip
7 40V Lithium ion battery
8 Charger (Not Pictured)