Use and Care Manual

NOTE:

The high velocity nozzle tip comes packaged inside the blower tube. Remove

the high velocity nozzle tip from inside blower tube before operation.

OPERATION

WARNING: Always wear safety glasses. Wear a filter mask if the operation is dusty. Use of

proper gloves and substantial footwear is recommended when working outdoors.

ON/OFF SWITCH (FIG. 2)

To turn the tool ON: press the power trigger. The blow-

er will run at LOW SPEED (92 MPH).

To turn the tool OFF: release the power trigger.

CHANGING THE SPEED (FIG. 2)

There are two speed buttons on top of the 40V blower.

The lower button changes the speed to HIGH SPEED

(114 MPH). The upper button changes the speed to

TURBO SPEED (124 MPH).

Pressing either button once will engage said speed.

Pressing it a second time will disengage the speed,

bringing the blower back to its original LOW SPEED

Turbo

Speed

High

Speed

Trigger

Switch

Fig. 2

(92 MPH).

NOTE: Turbo speed has been designed to auto-shut off after 35 seconds, reverting the blower back to

its low speed.