Use and Care Manual

KNOW YOUR BLOWER

TOOL PURPOSE

This blower is designed for blowing leaves. Refer to the diagram below to become familiarized with the

parts and controls of your 40V Max Lithium Ion Cordless Blower.

1 Carrying Handle

2 Power Trigger

3 High Speed Button

4 Turbo Speed Button

5 Blower Tube

6 High Velocity Nozzle Tip

Table A

NOTE:

The high velocity nozzle tip comes packaged inside the blower tube. Remove

the high velocity nozzle tip from inside blower tube before operation.

Red

Light

Green

Light

Status Charger LED Light Details

On Off Standby

The battery is not connected and charger is in standby mode.

On Flashing Charging The battery is charging.

Off On Fully Charged The battery is fully charged and should be removed from the charger.

Flashing Off Error

There is a problem with the battery. Contact customer service at

1-800-232-1195 for assistance in replacing the battery.

Flashing Flashing

Temperature

Error

The temperature is either too high or too low. If the battery is warm, re-

move it from the charger for a few minutes to let it cool down. Once the

temperature returns to the normal temperature range (50°F - 104°F),

you can continue charging the battery.