MODEL 40410 40V MAX LITHIUM ION CORDLESS BLOWER For replacement parts visit WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions.
TABLE OF CONTENTS Specifications................................................................................... 2 Introduction..................................................................................... 3 General Safety Rules........................................................................ 4 Specific Safety Rules for the Blower................................................. 6 Specific Safety Rules for the Battery & Charger................................ 8 About the Battery............
INTRODUCTION Thanks for purchasing the WEN 40V Max Lithium Ion Cordless Blower. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety concerns, as well as helpful assembly and operating instructions for your tool.
GENERAL SAFETY RULES Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: Read and understand all warnings, cautions and operating instructions before using this tool. Failure to follow all instructions listed below may result in personal injury and tool damage. To reduce the risk of fire, electric shock, or injury, follow the below precautions. WORK AREA SAFETY 1.
GENERAL SAFETY RULES PERSONAL SAFETY 1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. 2. Use personal protective equipment. Always wear eye protection.
SPECIFIC SAFETY RULES FOR THE BLOWER Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: Read and understand all warnings, cautions and operating instructions before using this tool. Failure to follow all instructions listed below may result in personal injury and tool damage. WARNING: Do not let comfort or familiarity with the product replace strict adherence to product safety rules.
SPECIFIC SAFETY RULES FOR THE BLOWER WARNING: To reduce the risk of electric shock, always unplug the charger before performing any cleaning or maintenance. Do not allow water to flow into the charger. Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock hazards. 14. Remove or disconnect the battery before servicing, cleaning, or removing material from the appliance. 15. Do not dispose of the battery in a fire. The cell may explode. Check with local codes for possible special disposal instructions.
SPECIFIC SAFETY RULES FOR THE BATTERY & CHARGER WARNING: Do not let comfort or familiarity with the product replace strict adherence to product safety rules. Failure to follow the safety instructions may result in serious personal injury. Despite all the safety precautions, caution must always be exercised when handling batteries. The following points must be obeyed at all times to ensure safe use. Safe use can only be guaranteed if undamaged cells are used.
SPECIFIC SAFETY RULES FOR THE BATTERY & CHARGER WARNING: To reduce the risk of electric shock, always unplug the charger before performing any cleaning or maintenance. Do not allow water to flow into the charger. Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock hazards. 9. DO NOT BURN OR INCINERATE BATTERY PACKS. Battery packs may explode, causing personal injury or damage. Toxic fumes and materials are created when battery packs are burned. 10. DO NOT CRUSH, DROP OR DAMAGE BATTERY PACKS.
ABOUT THE BATTERY WARNING: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. WARNING: To reduce risk of injury, charge only WEN batteries with this charger. Other types of batteries may burst causing personal injury and damage. ABOUT THE BATTERY 1. The battery pack supplied with your cordless tool is only partially charged.
ABOUT THE CHARGER WARNING: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. WARNING: To reduce risk of injury, charge only WEN batteries with this charger. Other types of batteries may burst causing personal injury and damage. ABOUT THE CHARGER Protect the battery charger and its cord from damage. Keep the charger and its cord away from heat, oil and sharp edges.
ELECTRICAL INFORMATION 1. POLARIZED PLUGS. To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not modify the machine plug or the extension cord in any way. 2.
KNOW YOUR BLOWER TOOL PURPOSE This blower is designed for blowing leaves. Refer to the diagram below to become familiarized with the parts and controls of your 40V Max Lithium Ion Cordless Blower. 1 2 3 4 5 1 Carrying Handle 2 Power Trigger 3 High Speed Button 4 Turbo Speed Button 5 Blower Tube 6 High Velocity Nozzle Tip 6 NOTE: The high velocity nozzle tip comes packaged inside the blower tube. Remove the high velocity nozzle tip from inside blower tube before operation.
ASSEMBLY AND ADJUSTMENTS WARNING: Do not plug in or turn on the tool until it is fully assembled according to the instructions. Failure to follow the safety instructions may result in serious personal injury. REMOVING AND CHARGING THE BATTERY 1. Press the battery release button (on top of the battery compartment) and slide the battery out of the blower. 2. Slide the battery into the charger. Refer to Tables A (p. 12) & B (below) to understand what the lights on the battery and charger indicate. 3.
OPERATION WARNING: Always wear safety glasses. Wear a filter mask if the operation is dusty. Use of proper gloves and substantial footwear is recommended when working outdoors. NOTE: The high velocity nozzle tip comes packaged inside the blower tube. Remove the high velocity nozzle tip from inside blower tube before operation. ON/OFF SWITCH (FIG. 2) To turn the tool ON: press the power trigger. The blower will run at LOW SPEED (92 MPH).
MAINTENANCE WARNING: In order to avoid personal injury and the risk of fire and electric shock, remove the battery pack before adjusting, inspecting, or cleaning the blower. WARNING: Any attempt to repair or replace electrical parts on this tool may be hazardous. Servicing of the tool must be performed by a qualified technician. When servicing, use only identical WEN replacement parts. Use of other parts may be hazardous or induce product failure.
STORAGE Examine the blower thoroughly for worn, loose or damaged parts. If you need assistance, contact WEN customer service at 1-800-232-1195. Remove the battery from the tool before storing and unplug the charger before storing. Store your blower, battery pack and charger in a cool, dry place – do not store the battery pack or charger where temperatures may exceed 104°F, such as in direct sunlight or inside a vehicle or metal building during the summer. Always store battery and charger indoors.
EXPLODED VIEW & PARTS LIST 18
EXPLODED VIEW & PARTS LIST No. Part No. Description Qty. 1 2 3 4 7 10 11 12 13 14 40401 40410-002 40410-003 40410-004 40410-007 40410-010 40410-011 40410-012 40410-013 40410-014 2.0Ah Battery Right Handle Left Handle Left Housing Right Housing Left Air Inlet Right Air Inlet Battery Latch Spring Switch 1 1 1 1 1 1 1 1 1 1 15 16 17 18 19 20 21 22 23 22.1 40410-015 40410-016 40410-017 40410-018 40410-019 40410-020 40410-021 40410-022 40410-023 40410-022.
WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
