MODEL 40400C 40V MAX LITHIUM ION CHARGER For replacement parts visit WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions.
TABLE OF CONTENTS Specifications................................................................................... 2 Introduction..................................................................................... 3 Specific Safety Rules for the Battery & Charger................................ 4 About the Battery............................................................................. 6 About the Charger............................................................................
INTRODUCTION Thanks for purchasing the WEN 40V Max Lithium Ion Charger. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety concerns, as well as helpful assembly and operating instructions for your tool. SAFETY ALERT SYMBOL: Indicates danger, warning, or caution.
SPECIFIC SAFETY RULES FOR THE BATTERY & CHARGER Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: Do not let comfort or familiarity with the product replace strict adherence to product safety rules. Failure to follow the safety instructions may result in serious personal injury. Despite all the safety precautions, caution must always be exercised when handling batteries.
SPECIFIC SAFETY RULES FOR THE BATTERY & CHARGER WARNING: To reduce the risk of electric shock, always unplug the charger before performing any cleaning or maintenance. Do not allow water to flow into the charger. Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock hazards. WEN Products may result in risk of fire, electric shock or personal injury. Do not attempt to recharge any non-rechargeable batteries. 8. UNPLUG CHARGER WHEN NOT IN USE. Make sure to remove battery packs from unplugged chargers.
ABOUT THE BATTERY WARNING: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. WARNING: To reduce risk of injury, charge only WEN batteries with this charger. Other types of batteries may burst causing personal injury and damage. ABOUT THE BATTERY 1. The battery pack supplied with your cordless tool is only partially charged.
ABOUT THE CHARGER WARNING: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. WARNING: To reduce risk of injury, charge only WEN batteries with this charger. Other types of batteries may burst causing personal injury and damage. ABOUT THE CHARGER Protect the battery charger and its cord from damage. Keep the charger and its cord away from heat, oil and sharp edges.
ELECTRICAL INFORMATION 1. POLARIZED PLUGS. To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not modify the machine plug or the extension cord in any way. 2.
KNOW YOUR CHARGER TOOL PURPOSE This charger is designed for recharging WEN 40V Max Lithium Ion batteries (model numbers 40401 and 40404). Refer to the diagram below to become familiarized with the parts and controls of your 40V Max Lithium Ion charger NOTE: The battery is not included. To purchase a 40V battery go to wenproducts.com. Charger LED Lights Power Plug Red Light Green Light Status Charger LED Light Details On Off Standby The battery is not connected and charger is in standby mode.
OPERATION & MAINTENANCE WARNING: Fully charge your battery every 3 months to preserve your battery’s life. Do not let your battery get below 20% charge; this will cause your battery to prematurely fail. See Tables A and B below to understand what the LED lights on your charger and battery indicate. CHARGING THE BATTERY 1. Slide the battery into the charger. Refer to Tables A (p. 9) & B (below) to understand what the lights on the battery and charger indicate. 2.
STORAGE Examine the battery and charger thoroughly for worn, loose or damaged parts. If you need assistance, contact WEN customer service at 1-800-232-1195. Remove the battery from the tool before storing and unplug the charger before storing. Store your battery pack and charger in a cool, dry place – do not store the battery pack or charger where temperatures may exceed 104°F, such as in direct sunlight or inside a vehicle or metal building during the summer. Always store battery and charger indoors.
WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
