Use and Care Manual

10

Follow these steps to operate:
1. Loosen the locking lever. Pole will slide freely.
2. Adjust the Tube 1 &2 length that can easy reach the branch, and then tighten the locking lever securely.
3.UsebothhandstogripPoleSaw.UseonlydesignatedgripareaswhenoperatingPoleSaw.Usermgrip.
ThumbsandngersmustwraparoundPoleSawhandleandpole.
4.Makesureyourfootingisrm.Keepfeetapart.Divideyourweightevenlyonbothfeet.
5.Whenreadytomakeacut,pressintriggerswitchlock-outandsqueezetriggerswitch.
This will turn pole saw on.
OPERATION
Warning – Always follow safety procedures. Use the chainsaw
only for cutting wood and not other types of materials. Do not
use the chainsaw as a lever for lifting, moving or splitting ob-
jects. Never cut in high wind, bad weather, poor visibility con-
ditions, or in extreme temperatures. Always check for dead
branches which may fall during cutting operations.




NEVER STAND
DIRECTLY UNDER
THE LIMB YOU
ARE TRIMMING.

YOURSELF OUT
OF THE PATH OF
FALLING DEBRIS.
NEVER STAND
ON A LADDER
OR OTHER TYPE
OF UNSTABLE

USING THE POLE

DO NOT USE

-

OR TELEPHONE
LINES. MAINTAIN A
MINIMUM CLEAR-
ANCE OF 10 FEET

LINES.
KEEP OTHER
PERSONS FROM
CUTTING END OF

A SAFE DISTANCE

AREA.
POLE SAW TRIMMING PRECAUTIONS