Use and Care Manual

ASSEMBLY AND INSTALLATION

1. Attach the four feet (Fig. B - 1) along each respective corner of

the base.

2. Place the machine onto a work bench and secure it in place by

using the three holes provided in the base (Fig. A).

3. Screw the guide rail to the threaded hole on the vise base.

Tighten the nut to fix it.

4. Attach the work stop (Fig. B - 2) to the guide rail (Fig. B - 3).

Secure it in place by tightening the lock handle.

ASSEMBLY

Fig. A

Fig. B

ADJUSTMENTS

POSITIONING THE WORK STOP

If you have to make a series of cuts with a uniform

length, use the supplied work stop.

1. Loosen the lock handle (Fig. C - 1).

2. Slide the work lock to the desired distance.

3. Tighten the lock handle again.

WARNING: Make sure that the work stop does not

interfere with the downward movement of the blade.

Fig. C