Use and Care Manual

ADJUSTING THE DUST BLOWER (Fig. 9)

For best results, the dust blower tube (1) should be

adjusted to direct air at both the blade and the work

piece.

ASSEMBLY AND ADJUSTMENTS

SAWDUST COLLECTION PORT (Fig. 10 and

11)

This scroll saw allows a hose or vacuum accessory (not

provided) to be connected to the dust chute (2). If ex-

cessive sawdust buildup occurs inside the base, use a

wet/dry vacuum cleaner or manually remove sawdust

by removing the screws (3) and metal plate on the left

side of the saw. Reattach the metal plate and screws

before starting the saw. This will keep your saw cutting

efficiently.

Fig. 10

Fig. 11

Fig. 9