Use and Care Manual

WARNING: Remove the plug from the socket before carrying out any adjustments, service or mainte-

nance.

1. NEVER use water or other liquids to clean the electrical portions of the tool.

2. ALWAYS clean the tool and bits after use.

3. ENSURE that the ventilation slots are not blocked to prevent overheating.

4. REMOVE AND DISPOSE of damaged attachments.

5. CHECK that the locking jaw is correctly aligned before use.

MAINTENANCE

EXPLODED VIEW AND PARTS LIST

No. Part Number Description Qty

1 2309-001 Locking Sleeve 1

2 2309-002 Collet Nut 1

3 2309-003 Collet 1

4 2309-004 Driver Shaft 1

5 2309-005 Right Housing 1

6 2309-006 Limited Plate 1

7 2309-007 Shaft Lock Spring 1

8 2309-008 Shaft Lock Button 1

9 2309-009 Bearing 1

10 2309-010 Sleeve 1

11 2309-011 Hex Screw 1

12 2309-012 Rubber Buffer 2

13 2309-013 Motor 1

14 2309-014 Push Plate 1

15 2309-015 Spring 1

16 2309-016 Left Housing 1

17 2309-017 Circuit Board 1

18 2309-018 Indicator Cover 1

19 2309-019 Power Switch 1

20 2309-020 Push Button 1

21 2309-021 Screw M3X12 5

22 2309-022 Battery Cover 1

23 Battery 1

24 End Cover 1

25 Back Moving Spring 2

26 Release Tab 2

27 Hanger 1

28 Screw M3X12 1

N/A 2309-023 Bit Accessory Kit 1

N/A 2309C Charger 1

2309B