User guide
• Inspect tool cords and extension cords periodically and, if damaged, have
repaired by a qualied service technician Stay constantly aware of cord
location and keep it away from the rotating wheel
• Never use in an explosive atmosphere Normal sparking of the motor could
ignite fumes
• Use only outdoor extension cords with approved ground connection that are
intended for use outdoors and so marked
• Avoid awkward operations and hand positions where a sudden slip could cause
your hand to move into the drill ALWAYS make sure you have good balance
• Allow the motor to come up to full speed before starting a cut to avoid binding or
stalling
• Do not use tool if switch does not turn it on and off Have defective switches
replaced by an authorized service center
• Replacement parts All repairs, whether electrical or mechanical, should be
made by a qualied service technician at an authorized service center
• Keep hands away from working area Do not hand hold pieces so small that
your ngers go under the tool Do not reach underneath work or in tool path
with your hands and ngers for any reason
• Before using the tool, be sure all adjustments are secure
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals known
to cause cancer, birth defects or other reproductive harm Some
examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement and other
masonry products
• Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this
type of work To reduce your exposure to these chemicals, work in a well
ventilated area, and work with approved safety equipment, such as those
dust mask that are specially designed to lter out microscopic particles