User guide




• The real secret of the Cordless Rotary Tool is its speed To understand the ad-
vantages of its high speed, you have to know that the standard portable electric
drill runs at speeds up to 2,800 revolutions per minute The typical electric drill
is a low-speed, high torque tool; the Cordless Rotary Tool is just the opposite—
a high-speed, low torque tool The chief difference to the user is that in the
high-speed tools, the speed combined with the accessory mounted in the collet
does the work You don’t apply pressure to the tool, but simply hold and guide it
In the low speed tools, you not only guide the tool, but also apply pressure to it,
as you do, for example, when drilling a hole
• It is this high speed, along with its compact size and wide variety of special ac-
cessories and attachments that makes your Cordless Rotary Tool different from
other power tools The speed enables it to do jobs low speed tools cannot do,
such as cutting hardened steel, engraving glass, etc
• Getting the most out of your Cordless Rotary Tool is a matter of learning how to
let this speed work for you

The charger is ready to use without adjustment and is easy to operate
• Plug the charger into an appropriate 120Volt outlet
• Carefully insert the battery pack into the charging base Make sure the battery
pack is fully seated in the charger The green indicator light will come on indicat-
ing the charging process has started
• Normal charging takes about 3 hours
• Unplug the charger, remove the battery pack and insert into the rotary tool
Figure
1 Charger
2 Adapter
3 Battery Packet
➌
➊
➋