Use and Care Manual

JIG SAW SAFETY WARNINGS

JIG SAW SAFETY (CONT.)

12. MAKING ADJUSTMENTS. Always turn off and re-

move the battery from the jig saw before making ad-

justments or changing blades. Accidental start-ups may

occur if the jig saw has power during a blade change. Do

not touch the blade immediately after operation. Allow

time for the blade to cool before removing it.

13. TOOL MAINTENANCE. Develop a periodic mainte-

nance schedule for your tool. Follow the instructions for

lubrication, storage changing accessories.

14. CLEANING THE TOOL. When cleaning a tool be care-

ful not to disassemble any portion of the tool. Internal

wires may be misplaced or pinched and safety guard re-

turn springs may be improperly mounted. Certain clean-

ing agents such as gasoline, carbon tetrachloride, am-

monia, etc. may damage plastic parts.

15. USE COMMON SENSE. These safety instructions

can’t possibly warn of every scenario that may arise with

this tool, so always make sure to stay alert and use com-

mon sense during operation.

WARNING! Do not let comfort or familiarity with the product replace strict adherence to product safety rules.

Failure to follow the safety instructions may result in serious personal injury.