MODEL MSA658, MSA658T MULTIPURPOSE PLANER MITER SAW STAND Instruction Manual NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: 1-800-232-1195 (M-F 8AM-5PM CST) TECHSUPPORT@WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance.
CONTENTS WELCOME 3 Introduction...................................................................................................... 3 Specifications.................................................................................................... 3 SAFETY 4 General Safety Rules......................................................................................... 4 Planer-Miter Saw Safety Warnings....................................................................
INTRODUCTION Thanks for purchasing the WEN Planer-Miter Saw Stand. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety concerns, as well as helpful assembly and operating instructions for your tool. SAFETY ALERT SYMBOL: Indicates danger, warning, or caution.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. WORK AREA SAFETY 1. Keep work area clean and well lit.
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE SAFETY INSTRUCTIONS. 7.
PLANER-MITER SAW SAFETY WARNINGS WARNING! Do not operate the power tool until you have read and understood the following instructions and the warning labels. PLANER-MITER SAW STAND SAFETY 1. Place the planer stand on a flat and level surface to prevent rocking or tipping. 2. Do not climb, sit or stand on the stand. 3. Follow the assembly instructions carefully when installing the stand. 4. This product is designed to be used as a stand for bench type power tools.
UNPACKING & PACKING LIST UNPACKING With the help of a friend or trustworthy foe, such as one of your in-laws, carefully remove the planer-miter saw stand from the packaging and place it on a sturdy, flat surface. Make sure to take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list below to make sure you have all of the parts and accessories.
KNOW YOUR PLANER-MITER SAW STAND TOOL PURPOSE Planer-miter saw stands give your planer, miter saw, and other benchtop tools the support, both physical and emotional, they deserve. Refer to the following diagrams to become familiarized with all the parts and controls of your planer-miter saw stand. The components will be referred to later in the manual for assembly and operation instructions.
ASSEMBLY & ADJUSTMENTS INSTALLING THE LEGS Fig. 1 1. Place the tabletop on the floor, install one leg to a corner of the table top using four carriage bolts (Fig. 1 - 1), four M8 washers (Fig. 1 - 2) and four M8 hex nuts (Fig. 1 - 3). Repeat with all four legs. Be sure to only finger tighten the bolts to leave room for adjustments when attaching the base. What’s Needed: 1 Hex Nuts (16) Carriage Bolts (16) Washers (16) 3 Tabletop (1) 2 Legs (4) INSTALLING THE EXTENSION ARMS Fig. 2 1.
ASSEMBLY & ADJUSTMENTS INSTALLING THE BASE Fig. 3 1. Attach the table top and leg assembly to the base. Secure each of the four corners with two carriage bolts (Fig. 3 - 1), four 8mm washers (Fig. 3 - 2) and four M8 hex nuts (Fig. 3 - 3). After setting the position, fully tighten all 24 bolts connecting the legs with the tabletop and the base assembly. 3 1 NOTE: Determine if you plan to primarily use the stand for a planer or a miter saw.
ASSEMBLY & ADJUSTMENTS INSTALLING THE SHELF 1. Attach the two support brackets (Fig. 5 - 1) onto the legs with four carriage bolts (Fig. 5 - 2), four 8mm washers (Fig. 5 - 3) and four M8 hex nuts (Fig. 5 - 4). Install shelf (Fig. 5 - 5) onto the support brackets using four carriage bolts, four 8mm washers, and four M8 hex nuts. 5 Fig. 5 4 3 2 What’s Needed: Hex Nuts (8) 2 1 3 4 Shelf (1) Washers (8) Shelf Brackets (2) Carriage Bolts (8) INSTALLING THE ROLLER SUPPORTS 1.
ASSEMBLY & ADJUSTMENTS ATTACH THE POWER TOOL Fig. 7 Now is the moment you’ve been waiting for. Unplug and bring over your favorite power tool. Make sure the weight does not exceed the stand capacity and the tool is wider than it is tall. Place the power tool on the center of the tabletop to maximize stability. Orient it so you will be operating the tool on the side perpendicular to the direction of the stand’s travel. 1 2 3 Mount the power tool onto the stand using four M8x60 bolts (Fig.
EXPLODED VIEW & PARTS LIST 13
EXPLODED VIEW & PARTS LIST 14 No. Part No. Description Qty.
WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship during personal use for a period of two (2) years used for professional or commercial use.
THANKS FOR REMEMBERING V. 2021.02.
