User Guide

How to manually reset the Wemo®
Mini Smart Plug, F7C063 to factory
defaults
Body
There are two scenarios where you will need to reset your Wemo® Mini Smart Plug,
F7C063.
Scenario 1: If you see a blinking orange light on your Wemo® Mini Smart Plug,
F7C063, you will need to restore your Wemo Mini by following the steps below:
NOTE: If you changed your Wi-Fi router but you want to save its friendly name and the
Rules applied to it, skip Step 2 below.
Step 1: Press and hold the power button.
Step 2: Unplug your Wemo Mini then plug it back in while holding the
power button down.
Step 3: Continue to hold the power button down until the light blinks
rapidly then release it.
Step 4: If the light alternately blinks orange and white, then it is
ready for setup. Click here for instructions on how to set up your
Wemo Mini.
The reset process will take 30-90 seconds to complete.
Scenario 2: If you are unable to locate your Wemo Mini on your phone’s Wi-Fi list or in
your Wemo App, you can proceed to do the following:
Step 1: Unplug the Wemo Mini from the power outlet.
Step 2: Plug the Wemo Mini back into the power outlet.
Step 3: The light will blink white to signify it is starting up. When the
light turns to a solid white light then it is connected to the network.
Knowledge Article http://belkin.force.com/Articles/articles/en_US/How_To/How-to-manuall...
1 of 2 10/30/2017 10:51 PM