Setup Guide

Connect NEUTRAL and GROUND wires
NOTE: Your existing wires may be dierent colors than
those shown.
Use a wire nut to connect the white NEUTRAL wire on
the Dimmer to the NEUTRAL wires (usually white) in the
wall.
Use a wire nut to connect the green GROUND wire on the
Dimmer to the GROUND wires (usually green or bare
copper) in the wall.
Install Dimmer into the wall
6
Almost done! Tug on each wire nut to make sure they
are secure on the wires.
Carefully tuck wires behind the Dimmer and insert the
Dimmer into the box. It could get crowded in there.