Setup Guide
Detach the NEUTRAL wires
Look for the GROUND wires (usually green or
solid copper) and unscrew the wire nut
connecting them.
Unscrew the wire nut connecting the NEUTRAL wires.
Identify the GROUND wires
3
NOTE: You may
have a dierent
number of ground
wires than shown.
Peel o and apply the LINE and LOAD wire
labels below. If you’re unsure which wire is
which, we’ll help you in the next step.
Identify and label LINE and
LOAD wires
4
Wire labels
LOAD
CHARGE
LINE
LIGNE
LINE
LIGNE
LOAD
CHARGE
LOAD
LINE
NOTE: Your existing
wires may be in
dierent locations
than shown.