Wiring Guide

The Wemo® Wi-Fi Smart Dimmer, F7C059 controls different dimming levels of a dimmable light
bulb, including switching it ON and OFF. This article shows the correct wiring diagram of the Wemo
Dimmer.
WARNING: Electrical wirings of the Wemo Dimmer should be done by a professional
electrician. Incorrect installation is dangerous or illegal. Please call a professional electrician if you
are unfamiliar or uncomfortable with electrical work.
Wiring Diagrams
Diagram one: You should see two additional neutral wires connected by a wire nut as well as the
line, load and ground wires.
 Yellow – Ground wire
 Black – Switch (Line / Load) wire
 White – Neutral wire
Diagram two: You need neutral wires to install a Wemo Dimmer. Do not try to do it without neutral
wires and be careful not to reverse the line and load wires; otherwise, nothing will work.
 Yellow – Ground wire
 Black – Line wire
 Red – Load wire
 White – Neutral wire