Installation Manual

support WPA™, WPA2™ and WEP security types. If you are using a business class router with enterprise
security your Wemo will not be able to connect to it.
2. Change the channel
If the channel is clogged, you might see trouble connecting to the Wemo device or in keeping it connected. The
recommended Wi-Fi channel setting is Auto. However, you can also change your router’s channel to avoid
interference with other routers in your area that are possibly using the same channel as yours. If you are using a
Belkin router, click here to know how to change the Wi-Fi channel.
3. Broadcast the Wi-Fi name
Make sure that your Wi-Fi is broadcasting at 2.4 GHz frequency and that it supports the Wireless-B, -G or -N
standards. Also, make sure that the router’s Wi-Fi name is set to broadcast. If it is hidden, your Wemo may
experience difficulties connecting or staying connected to your Wi-Fi.
4. Check the Wi-Fi password
Check your router's security settings. Wemo only supports WPA™, WPA2™ and WEP security types and
passwords of eight to 63 characters comprised of numbers, letters and special characters.