Item # : ORTRINCRBU Assembly Instructions TM Walker Edison ® Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 08/08/2019(L) Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved. P.
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The main type of hardware used to assemble this product are: bolts and screws. V. Power tools should not be used to assemble this product. VI. Drill may be needed for securing product to wall.
Parts List 3 2 1 5 4 6 Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Hardware List A M6x38mm Bolt 8 pcs B M6x25mm Bolt 1 pc Flat washer 9 pcs Hex Key 1 pc C D M4 Philips head screwdriver required for assembly (not included) The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included. Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 1 3 B C D 2 Using flat washer (C) and bolt (B) to attach part (2) to part (3) with hex key (D). Note: Do not tighten bolt in step 1, leave it in step 2. Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 2 2 C 3 1 A D Using flat washer (C) and bolt (A) to attach part (2, 3) to part (1) with hex key (D) as per diagram, and tighten all bolts. Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 3 5 4 6 Place cushion (4, 5, 6）on unit as per diagram. Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 4 Final Assembly Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved. P.
