Specifications

FEATURES & OPERATING CONTROLS
Fig. 1 Features & Operating Controls - Water Max™ Dispenser
GENERAL
2
1. STRAIN RELIEF (Left Side, Bottom) Field supply wiring enters the appliance here.
12. DELIMING FITTING Tank mounted quick disconnect fitting for deliming procedure.
22. POWER SWITCH Energizes the appliance.
17. POWER INDICATOR Glows when Water-Max™ is ON and operating normally.
23. DISPENSER NOZZLE Hot water is dispensed here. Inserting water tank lowers nozzle into “dispense” position.
25. ADJUSTABLE LEG Provides required clearance to counter, and allows unit to be leveled.
26. RUBBER FOOT Allows Water-Max™ to operate without “walking” or sliding.
40. CONTROLLER
CIRCUIT BOARD
(Inside left side) Access by qualified technician only.
41. TERMINAL BLOCK (Inside, under tank shelf) Field supply wiring connects here.
Access by qualified technician only.
55. AIR FLOW CHANNEL Provides a measure of protection for transformer cooling air outlet.
57. DELIMING FITTING Quick disconnect fitting attaches to deliming solution bottle.
60. FUSES Provide protection for electrical circuits.
62. TANK INDICATORS LEFT - Tank must be delimed
RIGHT - Glows when tank is properly installed.
63. STATUS INDICATOR Glows when filling, flashes when controller is in “error” mode.
65. TANK POSITION
SWITCH
Held ON when WATER TANK depresses DISPENSER NOZZLE. Unit will not operate
unless WATER TANK is in place.
76. CONNECTOR Allows WATER TANK to connect to Water-Max™.
Also provides power to keep tank contents hot.
78. VIEW PORT Allows digital readout of controller to be observed.
90. NAMEPLATE (Left side) Gives manufacturer information; lists model no., serial no. and electrical
specifications.