Specifications

CLEANING INSTRUCTIONS - FAUCET & TANK SCREEN
CLEANING - MONTHLY
Clean Faucet
1. Drain and remove tank.
• Press power switch to the OFF position.
• Drain all water from tank into pitcher. As each pitcher is full,
turn faucet off and dump pitcher of water into sink. It will take
approximately 6 pitchers to completely empty tank.
• Remove tank from hot water dispenser.
2. Disassemble
• Disassemble faucet by unscrewing
bonnet. Pull straight up on handle
to remove the bonnet assembly.
3. Clean seat and seat cup.
• Clean seat and seat cup by wiping
with a clean sanitized-soaked
towel. Use a stiff bristle brush to
remove any heavy deposits around
the seat or inside the faucet body.
4. Reassemble.
• Reassemble and reinstall faucet.
• Reinstall tank on Water-Max
TM
shelf. Press power switch to ON
position.
Clean Tank Screen
1. Drain and remove tank.
• Press power switch to the OFF position.
• Drain all water from tank into pitcher. As each pitcher is full,
turn faucet off and dump pitcher of water into sink. It will take
approximately 6 pitchers to completely empty tank.
• Remove tank from hot water dispenser.
• Remove tank lid.
2. Remove and clean screen.
• Clean screen with a bristle
brush.
3. Reinstall screen.
• Reinstall screen in faucet
fitting.
• Replace lid on tank.
• Reinstall tank on Water-Max
TM
shelf.
• Press power switch to the ON
position.
BONNET &
PLUNGER
ASSY.
SEAT
CUP
SEAT
(inside faucet)
FAUCET
BOD
Y
SCREEN
FAUCET
FITTING
CAUTION:
BURN HAZARD
Water in Water-Max
TM
is
EXTREMELY HOT!
USE AND CARE
17