Specifications

Deliming Water-Max
TM
Continued
9. Remove tank and lid.
• Remove tank from Water-Max
TM
.
• Remove tank lid from tank. Wash, rinse,
and sanitize tank lid in the 3-compartment sink. Allow to air dry.
Store tank lid for later use.
10. Clean tank.
• Using a standard green scrub pad, clean all scale and lime from
the tank and water level probe.
NOTE: The water level probe is located in the tank, in the back
right corner near the
top.
If tank comes clean, proceed to tank rinsing below; otherwise see
Overnight Tank Cleaning.
11. Rinse and reinstall tank.
• Rinse tank thoroughly at least twice. Pour all rinse water into a
sink.
• Reinstall tank lid on tank.
• Reinstall tank on Water-Max
TM
shelf. Make sure tank connector
is fully seated in socket.
• Press power switch to ON. After a short delay, tank will begin
filling.
CLEANING & DELIMING INSTRUCTIONS ( continued)
USE AND CARE
15
CAUTION:
SHOCK HAZARD
DO NOT submerge tank in
water.