Specifications

Deliming Water-Max
TM
Continued
6. Fill bottle with tap water and wait 10 minutes.
• Rinse solution bottle with warm tap water.
• Fill solution bottle 2/3 full with warm tap water and reattached
quick-disconnect cap.
• Wait 10 minutes. Insert solution bottle in quick-disconnect
fitting. Push down on bottle until latch “clicks”.
• Squeeze bottle, rinsing quick-disconnect fittings and forcing
deliming solution into the tank.
• Press the small plunger on the
Water-Max
TM
quick-disconnect to release the latch. While
pressing button, lift solution bottle straight up. Press the valve
on the solution bottle fitting to allow bottle to return to shape.
7. Wipe fittings.
• Wipe both quick-disconnect fittings with
• a soft cloth.
The quick disconnect fitting are now
ready for the next deliming session.
8. Soak tank for 1 Hour and drain.
• Press power switch to ON. Water-Max
TM
will dispense water
and any remaining deliming solution into tank.
• When Water-Max
TM
stops dispensing, press power switch to
OFF. Allow
Water-Max
TM
to set for 1 HOUR with deliming solution in tank.
• After 1 hour, drain pitchers of water from tank until tank is
empty.
• Pour all water and solution from tank into a sink.
CAUTION:
BURN HAZARD
Water in Water-Max
TM
is
EXTREMELY HOT!
CLEANING & DELIMING INSTRUCTIONS (continued)
USE AND CARE
14