Specifications

CAUTION:
BURN HAZARD
Water in Water-Max
TM
is
EXTREMELY HOT!
USE AND CARE
CLEANING & DELIMING INSTRUCTIONS (continued)
13
Deliming Water-Max
TM
Continued
2. Mix LIMESHIELD
TM
• Measure 1/2 cup (4 ounces) of hot tap water. Pour this into the
1 gallon pitcher.
• Measure 1/3 cup (2.5 ounces) of LIMESHIELD powder is com-
pletely dissolved.
• When foaming stops, swirl solution to insure the LIMESHIELD
power is completely dissolved.
3. Insert bottle in Water-Max
TM
quick-disconnect fitting.
• Use the funnel provided with the Water-Max
TM
to pour the
solution into the solution bottle.
• Screw quick-disconnect dispenser cap onto solution bottle.
Dispenser cap is chained to top of Water-Max
TM
.
• The quick-disconnect fitting is located on the left top of the
Water-Max
TM
. Press the latch until it “clicks” open.
• Turn the solution bottle over. Insert bottle quick-disconnect
fitting on the bottle into Water-Max
TM
quick-disconnect fitting.
Press solution bottle down until the latch “clicks”, lock the
solution bottle in place.
4. Squeeze solution into Water-Max
TM
.
• Squeeze solution bottle and force deliming solution into
Water-Max™ until empty.
5. Remove and rinse solution bottle.
• Press latch on tank quick-disconnect fitting until it “clicks” to
release the solution bottle. Lift solution bottle straight up
• Unscrew quick-disconnect cap allowing solution bottle to return
to shape.