Specifications

TROUBLESHOOTING SUGGESTIONS
10
SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY
No power to warmer Circuit breaker off or tripped Reset circuit breaker
Warmer will not heat Temperature control not set Set control to desired temperature
Warmer trips circuit breaker
Wet insulation
Verify ange-to counter seal is sound, or reseal
with food-grade silicone sealant
Pan leaking or other internal
damage
Contact your Authorized Wells Service Agency for
repairs
Internal damage
Contact your Authorized Wells Service Agency for
repairs
Warmer slow to heat
Mineral deposits on pan acting as a
insulator
Clean pan(s) with delime cleaner
Wired to wrong voltage
Verify supply voltage - must match voltage on
warmer nameplate
Drain-equipped unit will not
hold water
Drain valve not fully closed Check drain valve for debris and close fully
Drain valve damaged or pan(s)
leaking
Contact your Authorized Wells Service Agency for
repairs
There are no user-serviceable components in this appliance. In all instances of damage or malfunction, contact your
Authorized Wells Service Agency for repairs.
M012B.01 2M-308028 Owners Manual for SS206 Built-In Inf Sw. Warmers