Specifications
ELECTRONIC DEPTHOMETER
2853 Cherry Avenue
Signal Hill, CA 90755
Ph: (562) 424-8564
Fax: (562) 595-6174
CAVINS is pleased to announce the introduction of a
Depthometer equipped with Electronic displays for use on Coil
Tubing units. The displays are mounted in a NEMA 4 rated
enclosure and optionally can be mounted on a face plate to fit
in your control console. The unit comes standard with the fol-
lowing features:
The unit displays both Depth and Rate of Tubing travel.
By simply adjusting the calibration, display can be either in
feet or meters.
As the main wheel wears, accuracy can be maintained by
field calibration.
A direction switch allows the counter to increment from zero
regardless of the manner in which the depthometer is
mounted.
The counter allows an alarm to sound for up to 99.99 sec-
onds when a preset depth is reached.
The rate display can be programmed to sound an alarm
when the rate of tubing travel falls outside of a preset range.
A conversion kit is available to convert an existing mechan-
ical depthometer into an Electronic display type.
Counter/Rate display features:
English Prompts
Easy to Read
Easy to program
Large LED Display
5 Digits
High Intensity
High Contrast
Sealed Front Panel
NEMA 4 rated
Oil Tight
WaterTight
Chemical Resistant
Power Input
110 VAC or 10-26 VDC
EXTRA LARGE COUNTERS
FOR CAVINS DEPTHOMETERS
An optional Extra Large Counter is available when ordering
a new Depthometer or as a conversion kit for your own Cavins
Depthometer.
The Extra Large Counter has full 3/4" high numerals which
are more than twice the size used on the standard
Depthometer counter and facilitate easier reading in applica-
tions where the unit is mounted a short distance away from the
operator such as on coiled tubing rigs.
The following configurations (Fig. 3) are available for the
Extra Large Counter. Our standard configuration is #3, howev-
er, the configuration for your use may vary according to your
particular application and mounting location of the
Depthometer on your rig.
To order a complete Depthometer with the Extra Large
Counter or a conversion kit please specify the same informa-
tion as for a standard Depthometer and add the wording; with
Extra Large Counter with 3/4" numerals and also specify the
desired configuration (1, 2, 3 or 4).
26
OIL WELL TOOLS
Fig. 2
Extra Large Counter
Fig. 3
Counter Rotations
1
2 3
4










