Specifications

SUCKER ROD & TUBING
ELEVATORS
2853 Cherry Avenue
Signal Hill, CA 90755
Ph: [phone]
Fax: [phone]
TYPE ‘TA’ CENTER LATCH ELEVATORS
Purpose: Center-latch elevators of superior design
for handling collar-type drill pipe, casing and tubing.
Description: All TA elevators are constructed in two
halves of practically the same weight, providing
proper balance and easier opening and closing.
Special Features: Proper balance for easier han-
dling; latch and safety latch lock combinations; other
operator safety features
Safety features include guarded operating han-
dles to help prevent accidents to operators and an
extra handle at the rear of the elevators for easier,
safer operation. All TA elevators are equipped with a
latch and safety latch lock combination.
‘D’ SERIES
SIDE DOOR ELEVATORS
NO-KINK ROD ELEVATORS
PURPOSE: Safe efficient han-
dling of sucker rod sizes from 5/8"
(15.88 mm) through 1-1/8" (28.58
mm). Can also handle hollow type
sucker rod and tubing.
Special Features: Will not bend
or kink sucker rods even under the
heaviest loads.
Reversible-type body.
Capacity: The No-Kink elevator is
available in a heavy type, 43,000-
pound (19504.8 kg) capacity, for
longer rod strings.
NOTE: When ordering No-Kink
rod elevator for use with hollow-
type sucker rods or for handling
tubing, please specify make and
size of rod or tubing.
17
OIL WELL TOOLS
TA Elevator
“TA” SERIES COLLAR TYPE CENTER LATCH ELEVATORS A SERIES
*Must specify O.D. size and type of tubulars (plain or upset)
D SERIES SIDE DOOR COLLAR TYPE ELEVATORS
PURPOSE: Side-door elevators for handling plain or upset Collar-type
drill pipe, casing and tubing. Available in Type LD and LLD model.
Size Ranges and Capacities: API pipe sizes from 2-3/8" (60.33 mm)
through 3-1/2" (88.9 mm) O.D. See the table below.
For Collar-Type Drill Pipe and Tubing – Order by Part Number, Part Name and Size
SPECIFICATIONS–TYPE “LLD” SIDE DOOR ELEVATOR
*Must specify O.D. size and type of tubing (plain or upset)
SPECIFICATIONS–TYPE “LD” SIDE DOOR ELEVATOR
*Must specify O.D. size and type of tubing (plain or upset)
NO–KINK ROD ELEVATOR–HEAVY TYPE
REPLACEMENT PARTS–HEAVY TYPE
thgieW.paC.RN emarFepyTeziS
gkzo-blsnoTmmsehcnI
1.050—2-7/8 27—73 TA 32387–* 35 39 18
1.660—2-7/8 42—73 TA 32385–* 65 65 29
3-1/2—4-1/2 80—114 TA 32386–* 65 83 38
2-3/8—2-7/8 60—73 TA 32383–* 100 100 45
3-1/2—5 89—127 TA 32384–* 100 158 72
detaR.xaM dna .niM
Body Dia. Weldless Weight Cap.
No. Links Lbs.—Oz. Tons
2-3/8" 12591—* 1-3/4"—2-1/4" 138—0 100
2-7/8" 12591—* 1-3/4"—2-1/4" 136—0 100
3-1/2" 12591—* 1-3/4"—2-1/4" 133—0 100
hctaL tnorFetelpmoC rotavelE
Rod Part Wt. API Rated No. Part Wt.
Size No. Lbs–Oz. Cap.—Labs. Req. No. Lbs.—Oz.
5/8", 3/4" 27725 28—0 43,000 2 11745 0—8
3/4", 7/8" 27726 28—0 43,000 2 11746 0—8
1" 27727 28—0 43,000 2 11746-1 0—8
1-1/8" 27727-1 28—0 43,000 2 11746-2 0—8
.tWtraP.oN
.zO—.sbLemaN traP.oN.qeR
18–01liaB25772
26—0hctaL raeR93621
43—0niP hctaL22772
22—0gnirpS hctaL3606
2 28147 Bail Retainer Washer 0—3
Elevator Complete
Min. and Max. Dia. Rated
API Size Frame Weldless Links Capacitiy Weight Ea.
In. mm No.l in. mm tons tonne lb kg
2-3/8 60.33 23296—* 1-3/4—2-1/4 44.45—57.15 65 58.97 83 37.65
2-78 73.03 23296—* 1-3/4—2-1/4 44.45—57.15 65 58.97 82 37.20
31/2 88.9 23296—* 1-3/4—2-1/4 44.45—57.15 65 58.97 80 36.29