Specifications

HILLMAN-KELLEY
®
Power Tongs
2853 Cherry Avenue
Signal Hill, CA 90755
Ph: [phone]
Fax: [phone]
HILLMAN-KELLEY
®
Model 3700-H Standard Power Tong
Specifications
Over-all length – 42"; length from center of pipe to back-up eye – 29"
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 560 lbs.
Hydraulic power supply required:
36 gpm @ 1000 psi
15 gpm (minimum) @ 2000 psi
Tong speeds . . . . . . . . . . . . . . . . . . . . . . . . High gear – 110 rpm
Low gear – 30 rpm
Maximum tong torque (working) . . . . . . . . . . . . . . . . . 6000 ft. lbs.
Size range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.050" – 4.5" O.D.
HILLMAN-KELLEY
®
Model 4600-H Deluxe Power Tong
Specifications
Over-all length – 42"; length from center of pipe to back-up eye – 29"
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 585 lbs.
Hydraulic power supply required:
35 gpm @ 1000 psi
15 gpm (minimum) @ 2000 psi
Tong speeds . . . . . . . . . . . . . . . . . . . . . . . . High gear – 110 rpm
Low gear – 30 rpm
Maximum tong torque (working) . . . . . . . . . . . . . . . . . 6000 ft. lbs.
Size range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.050" – 4.5" O.D.
HILLMAN-KELLEY
®
Model 5500-H Power Tong
Specifications
Over-all length – 42"; width – 29"; length from center of pipe to
back-up eye – 29"
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 585 lbs.
Hydraulic power supply required:
35 gpm @ 1000 psi
15 gpm (minimum) @ 2000 psi
Tong Speeds . . . . . . . . . . . . . . . . . . . . . . . . . High gear – 95 rpm
Low gear – 30 rpm
Maximum tong torque (working) . . . . . . . . . . . . . . . . . 7000 ft. lbs.
Size range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.050" – 5.5" O.D.
HILLMAN-KELLEY
®
Model 500 C
For Tubing and Sucker Rods
Runs single or multiple tubing strings and sucker rods Tubing
jaws for 3/4" (1.050" O.D.) through 3" (3-1/2" O.D.) tubing; Rod
jaws for 5/8" through 1-1/8".
Eliminates need to change tongs from tubing to rod…just change
the jaws.
Compact, lightweight, powerful – weights only 400 pounds.
Efficiently powers in either direction; no need to turn over to
makeup or breakout.
Quick switch from makeup to breakout accomplished in seconds.
Easy to operate from front, sides, or rear.
Uses proven planetary gear box with hydraulic motor.
Has a low gear capable of breaking any sucker rod joint.
Works smoothly with an automatic retractor.
Dual strings can be run from rig floor.
Specifications
Over-all dimensions: length – 35"; width – 16"; (12" when equipped
for multiple-string operation); height – 25"; length from center of
pipe to back-up eye – 29"
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 lbs.
Hydraulic power supply required:
35 gallons per minute @ 1000 psi
10 gallons per minute (minimum) @ 2000 psi
Tong Speeds . . . . . . . . . . . . . . . . . . . . . . . . . high gear – 98 rpm
low gear – 25 rpm
Maximum torque high gear. . . . . . . . . . . . . . . . . . . . . 1150 ft. lbs.
Maximum torque low gear . . . . . . . . . . . . . . . . . . . . . 4000 ft. lbs.
*To order–Specify: 1. Tong Model. 2. Part numbers. 3. Pipe O.D.
4. With or without hanger. 5. With or without Back-up.
13
OIL WELL TOOLS
Dies with full circle
contact for running tubing.
Jaws used when running
sucker rods.
Model 500-C Hydraulically Powered Tong
8504-5000
Model 3700-H Power Tong
8505-5000
Model 4600-H Power Tong
8509-5000
Model 5500-H Power Tong
Hillman-Kelley is a licensed trademark of National Oilwell Varco, L.P.
8502-5344