Specifications

4. Menus
86 Instructions for Use for i-control No. 30018668 Rev. No. 1.8 2011-03
Kinetic Result:
Rotation: Select between Columnwise or Rowwise. If
Columnwise is selected, the results are displayed in a column
(in the Excel sheet). If Rowwise is selected, the results are
displayed in a row (in the Excel sheet).
Align: Select between A1A2 and A1B1. If A1A2 is selected, the
results are arranged in rows (of the microplate). If A1B1 is
selected, the results are arranged in columns (of the microplate).
Display Times: Select between Time per cycle and Time per
well. If Time per cycle is selected, a timespan per cycle is
displayed. If Time per well is selected, a timespan for every well
is displayed.
Cycles:
Range: Select All to display all cycles. Specified range is
currently not available.
Wavelength
Scan
Result:
Show Wavelength Scan data
Wavelength:
Presentation: Select between Wavelength over well or Wells
over wavelength. If Wavelength over well is selected the
wells are displayed in a column (in Excel) and the appropriate
wavelength data in the row. If Wells over wavelength is
selected the wells are displayed in a row (in Excel) and the
appropriate wavelength data in the column below.
Align: select between A1A2 and A1B1. If A1A2 is selected the
results are arranged by rows. If A1B1 is selected the results
are arranged by columns.
Show Wavelength chart
This command appends an Excel chart per well to the
worksheet; in this chart, values over wavelength are displayed
(X-axis: wavelength, y-axis: values).
NanoQuant
Show Raw Data
Select the Show Raw Data box to display the raw
measurement values of Nucleic Acid Quantification and
Labeling efficiency measurements.