Specifications

4. Menus
2011-03 Instructions for Use for i-control No. 30018668 Rev. No. 1.8 85
General Presentation:
Destination: Select between New workbook, New worksheet,
Use previous worksheet or Use existing workbook.
If New workbook is selected, a new workbook is opened every
time a measurement script is performed.
If New worksheet is selected, a new worksheet of the existing
workbook is created. If no workbook is open a new one is
created.
If Use existing workbook is selected, a workbook and a
worksheet must be selected. First select the workbook (an Excel
file), and then select the sheet the results should be placed into.
View Mode: Select between Matrix and List. If Matrix is
selected, the data alignment corresponds to a microplate; times
per well cannot be displayed. Not relevant for kinetic result
presentation. If List is selected, choose between: Align,
Rotation, Display Times.
Note
The option Use previous worksheet must not be used with i-control
versions lower than version 1.5.
Show: Select between All and Measured. If All is selected, the
whole plate geometry, including all possible rows and columns,
is displayed. If Measured is selected, only the results of the
measured wells are displayed.
Align: Select between A1A2 or A1B1. If A1A2 is selected, the
results are arranged in rows (of the microplate). If A1B1 is
selected, the results are arranged in columns (of the microplate).
Rotation: Select between Columnwise or Rowwise. If
Columnwise is selected, the results are displayed in a column
(in the Excel sheet). If Rowwise is selected, the results are
displayed in a row (in the Excel sheet).
Display Times: Select between No time or Time per well. If No
Time is selected, only the values are displayed. If Time per well
is selected, a timespan for each value is displayed.
Polarization Result:
Show polarization: Shows polarization data
Show anisotropy: Shows anisotropy data
Show total intensity: Shows total intensity data
Intermediates:
Show parallel intensity: Shows parallel intensity data
Show perpendicular intensity: Shows perpendicular intensity
data
Show parallel raw data: Shows parallel raw data
Show perpendicular raw data: Shows perpendicular raw data