Specifications

4. Menus
2011-03 Instructions for Use for i-control No. 30018668 Rev. No. 1.8 83
Tab Start Up:
Behavior at start up can be set.
1. Select a default plate.
2. Determine if the workflow pane should start with an empty workflow, plate
only, or plate and part of plate.
3. Select whether the last used instrument should be reconnected
4. Select whether the ‘Open Template’ dialog at startup should be skipped.
Tab General:
General options can be set.
1. Ask to save the workflow (when changed) before the measurement
starts.
2. Determine if
i-control window should be minimized while the
measurement is performed.
3. Determine the length of the list of recently used plate files (combo box for
plate selection in the plate program element).
4. Determine how many recently used workflow files are to be listed in the
file menu.
Tab Measurement:
Certain measurement settings can be saved as default settings.
1. Absorbance: Select default number of flashes.
2. Fluorescence: Select default number of flashes, default value for manual
z-position and default value for manual gain.
Tab Language:
1. Select the language of the i-control software (English and German are
currently available).
Click OK to save your settings or click Cancel to leave the dialog box without
saving any changes.