Specifications

4. Menus
78 Instructions for Use for i-control No. 30018668 Rev. No. 1.8 2011-03
Plate Definition...
This command allows you to choose a plate file from the drop-down list of
available plates. The plate definition files contain all relevant parameters of a
specific plate type, e.g. coordinates of measurement points, number of columns,
number of rows, well form, well diameter, plate height, plate height with cover…).
A graphic element at the bottom of the dialog visualizes the parameter which is
currently defined.
The available plate types are dependent on the instrument connected.
The following plate formats are already included in
i-control:
Manufacturer / Pdfx-Name Cat.-No. Drawing-No.:
Greiner
GRE6ft 657 160
657 185
AC-9909
GRE12ft 665 180
665 102
AC-9910
GRE24ft 662 160
662 102
AC-9911
GRE48ft 677 180
677 102
AC-9912
GRE96ft 655 101
655 161
AC-9701
GRE96fb_chimney 655 079
655 086
655 077
655 076
AC-65507x
GRE96fw_chimney 655 073
655 083
655 074
655 075
AC-65507x
GRE96ut 650 101
650 161
650 160
650 180
650 185
AC-6501xx
GRE96vt 651 101
651 161
651 160
651 180
AC-6511xx
GRE384fb 781 079
781 086
781 077
781 076
781 094
781 095
AC-0205