Specifications

4. Menus
2011-03 Instructions for Use for i-control No. 30018668 Rev. No. 1.8 73
With the Infinite M1000 instrument, only the built-in stacker can be used. If the
instrument is connected to a stacker, the Stacker Control option appears in the
Instrument menu:
• Select Restack to return the processed plates from the output stack to the
input stack in their original order. After Restack is selected, a dialog box
appears in which the plate type must be selected and confirmed with OK,
before the restacking procedure is performed.
Properties
Select Properties to set a new alias name for the instrument. Enter a new name
in the New Alias field and click Set Alias to confirm.
These settings take effect after restarting the software.