Specifications

4. Menus
72 Instructions for Use for i-control No. 30018668 Rev. No. 1.8 2011-03
Z-Position
For a detailed description of optimizing the Z-position, refer to the Instructions for
Use of the Infinite F500, M1000 and M200 Pro.
Stacker Control
If the reader is connected to a Connect stacker, the Stacker Control option
appears in the Instrument menu.
• Select Restack to return the processed plates from the output stack to the
input stack in their original order. After Restack is selected, a dialog box
appears in which the plate type must be selected and confirmed with OK,
before the restacking procedure is performed.
• Select Park to move the gripper into the park position.
• Select Teaching to start the Positioning Wizard. For details, see the
Instructions for Use for Connect, chapter 5. Positioning Wizard in i-control
and magellan.