Specifications

4. Menus
2011-03 Instructions for Use for i-control No. 30018668 Rev. No. 1.8 71
4.1.4 Instrument Menu
Disconnect/Connect
This toggle command connects or disconnects an instrument to or from i-control.
To connect to an instrument select the instrument name from the list.
Start
This command starts the measurement process. If the measurement is started, a
small window informs that the measurement is in progress. Excel opens
automatically and the results are displayed in a worksheet.
Start Stacker Run
If the reader is connected to a Connect stacker, it is possible to perform batch
processing. Select Start Stacker Run and the defined
i-control script is
performed on all available plates in the input stack.
Movements…
Choose this command to define plate, cuvette and filter movements.
Click Plate Out to move the plate carrier out or click Plate In to move the plate
carrier in. Click Filter Out to move the selected filter carrier out.
Click Cuvette In/ Out to move the cuvette correspondingly.
When a measurement is started, the plate is moved into the instrument
automatically.
Heating…
This command is used to set the target temperature of the instrument manually.
Select or enter the Target temperature and click Set and On to start instrument
heating. Click the Read button to display the current temperature inside the
instrument or click the Auto check box to have it read automatically. Click Off to
stop heating.
Click the down button,
, to display the heating graph and click the up button,
, to hide it. Click the close button, , to exit the Heating dialog box.