Specifications

3. Defining Measurements
2011-03 Instructions for Use for i-control No. 30018668 Rev. No. 1.8 67
The above definition results in the following workflow:
The Absorbance of all wells of a 96 well plate is first measured at 260 nm and
then at 280 nm. Both Absorbance measurements are performed in 5 kinetic
cycles.
Indenting the second Absorbance program elements on a level with Kinetic
Cycle item changes the workflow. Select the second Absorbance program
element and click the right mouse button. Select Release Strip from the context
sensitive menu. The Parameter window appears as shown in the screenshot:
In this workflow, an Absorbance Kinetic measurement with 5 cycles is done first
at 260 nm; finished this loop, Absorbance Endpoint measurement at 280 nm is
performed.
3.4.1 Ways to Indent or Release Program Elements
Select a program element from the Workflow pane.
• Click Edit and Indent/Release.
• Use the
/ buttons in the Tool bar to release or indent the selected
element.
• Click the right mouse button and click Release or Indent.