Specifications

3. Defining Measurements
2011-03 Instructions for Use for i-control No. 30018668 Rev. No. 1.8 57
3.1.1 Plate Size – Part of the Plate
Use the Plate program element in the workflow pane to choose a plate format.
Select the desired plate format from the Plate definition drop-down list (e.g. a
black Greiner 96 well plate).
To measure a particular well or a range of wells on the plate click the link
Use a
part of the plate. In the Part of Plate program element click the desired well or
drag a frame over the range of desired wells (e.g. A1 to F7). The selected wells
are displayed in yellow; unselected appear in blue.
Wells can be selected by dragging a frame over the plate. Further ranges can be
selected by holding down the Ctrl key on the keyboard and dragging another
frame around the wells to be selected.
By clicking on Details... the plate is zoomed in; well selection can be done also in
the zoomed window.