Specifications

2. Measurement Parameter Editor
2011-03 Instructions for Use for i-control No. 30018668 Rev. No. 1.8 53
2.3.1 Hierarchy of Elements
The hierarchy of elements in the Workflow pane is as follows:
1. Plate
2. Part of Plate (Range)
3. Well
Any desired measurement step can be inserted directly after a plate, range or
well element. Use the Release and Indent options in the Edit menu to modify
the sequence of execution of the single strip component. Select an element in the
Workflow pane, click the right mouse button and select Release or Indent.
Other elements from the Control bar can be inserted into the hierarchy of a
workflow as follows:
The first Range element is inserted directly after the Plate element; then all
subsequent Range elements can be inserted.
Well elements can only be inserted directly after a Range or a Plate element.
Only measurement steps of the same mode (e.g. absorbance only with different
wavelengths) are allowed within one well element.
Kinetic steps are possible within a Plate, Range or Well element.
Dispense steps are possible within a Plate or Range element.
Injections steps are possible within a Well element.
User Request, Comment, Wait and Wait until temperature is reached steps
are possible within a Plate, Range or Well element.
2.4 Info Pane
The Info pane on the right side of the screen displays information that is relevant
for the currently selected program element. Any warnings and errors are shown.