Specifications

2. Measurement Parameter Editor

2011-03 Instructions for Use for i-control No. 30018668 Rev. No. 1.8 41

Luminescence

The Luminescence program element is used to determine the activity of a

luminescent compound.

Example for the Infinite 200

Example for the Infinite200 Pro

Enter or select the respective parameters:

Attenuation

For strongly luminescent samples it may be necessary to apply

neutral density filters to reduce the luminescent signal.

Select the desired attenuation option. The options depend on

the instrument connected:

F/M200

Pro

F500 M1000

M1000

FW 2.0

and

higher

(Ref

30061442)

None

    

OD1



 

Automatic

(OD1)

 

Automatic

(OD2)



By selecting Automatic, only those wells that require

attenuation are attenuated by a factor of 10 using an OD1 filter

or by a factor of 100 using an OD2 filter depending on the

instrument connected.