Specifications

2. Measurement Parameter Editor
32 Instructions for Use for i-control No. 30018668 Rev. No. 1.8 2011-03
Example Infinite M1000
Enter or select the respective parameters:
Scan Selection Select either Excitation Scan or Emission Scan.
With the Infinite M1000 instrument, also the option
3D Scan can be selected.
Excitation Wavelength Values can only be entered if Excitation Scan is
selected.
From: Specify the range of the excitation by entering
a value.
To: Specify the range of the excitation by entering a
value.
Step: Enter a valid value.
Emission Wavelength Values can only be entered if Emission Scan is
selected.
From: Specify the range of emission by entering a
value.
To: Specify the range of emission by entering a
value.
Step: Enter a valid value.
Bandwidth For the Infinite M1000 instrument, the bandwidth for
excitation and emission can be selected.
Mode Select Top or Bottom.