Specifications

2011-03 Instructions for Use for i-control No. 30018668 Rev. No. 1.8 3

WARNING

CAREFULLY READ AND FOLLOW THE INSTRUCTIONS PROVIDED

IN THIS MANUAL BEFORE OPERATING THE INSTRUMENT.

Notice

Every effort has been made to avoid errors in text and diagrams; however, Tecan

Austria GmbH assumes no responsibility for any errors which may appear in this

publication.

It is the policy of Tecan Austria GmbH to improve products as new techniques

and components become available. Tecan Austria GmbH therefore reserves the

right to change specifications at any time with appropriate validation, verification,

and approvals.

We appreciate any comments on this publication.

Manufacturer

Tecan Austria GmbH

Untersbergstrasse 1A

A-5082 Grödig/Salzburg

AUSTRIA / EUROPE

T +43 6246/8933

F +43 6246/72770

E-mail: office.austria@tecan.com

www.tecan.com

The contents of this manual are the property of Tecan Austria GmbH and are not

to be copied, reproduced or transferred to another person or persons without

prior written permission.

Printed in Austria.

About the Instructions for Use

This document describes i-control, which is a software to control Infinite Series

Tecan microplate readers. It is intended as a reference and instruction for the

user.

This manual instructs how to:

• Install the software

• Operate the software

Remarks on Screenshots

Data and parameters displayed in screenshots vary depending on the instrument

connected. Details and examples are described in the respective Instructions for

Use of the connected instrument.